Home  |   INSTRUMENTATION AND ANALYZER |  Level Transmitter |  Float Level Transmitter

Float Level Transmitter

Float Level Transmitter
Float Level Transmitters Are Ideal For Continuous Level Monitoring In Water, Diesel, Chemical And Oils For Accurate Level Measurement. The Output Is Not Affected By Liquid Type, Temperature, Pressure And Other Physical Parameters. The Transmitter Is Factory Calibrated And Is Ready To Use.

ConstructionFloat Level Transmitter Consists Of Non Magnetic Sealed Stem Containing Series Of Reed Switches And Resistor, Float Carrying Magnet, Mounting Adaptor (Or Flange) And Enclosure Containing Electronics.
Consider Our Float Level Transmitters For All Your Continuous Liquidlevel Monitoring Needs Like Water, Diesel, Lube Oils, Fuels, Chemicals And Petrochemical Liquids.

Here Are Just Few Areas Where Transmitter Can Be Used.
UtilitiesBeverage IndustryMedicalPharmaceuticalsFood ProcessingBreweries.


  • Overall Length: 300 mm to 5000mm
  • Measuring Error: ±0.25 % or Span
  • Output Temperature Coefficient: ±0.007% / oC
  • Resolution: 5mm / 10mm
  • Ambient Temperature: -40oC to 60oC
  • Liquid Temp. Range: -40oC to 120oC
  • Liquid Min. Density: 0.8 gm/cc
  • Max. Pressure: 10 kg/cm2
  • Protection category: Weatherproof Ip66 to IS: 2147 (or) Flame Proof Gr. IIA & IIB to IS: 2148
  • Terminals: Max. 1.5mm2 Flexible
  • Cable Entry: PG11 for weather Proof ¾" Et for Flameproof (Glands not supplied)
  • Current Output: 2 wire, 4... 20 A 3 wire, 0-10 Vdc
  • Process Connection: Threaded Flanged Tri-clamp Others
  • Excitation Voltage: 10-36 V DC
  • Loop Resistance: Max. 1200 Ohms

Process Connection Threaded Flanged Tri Clamp Others
Max. Pressure 10 kg/cm2
Liquid Min. Density 0.8 gm/cc
Liquid Temp. Range -40oC to 120oC
Cable Entry PG11 For Weather Proof 3/4" Et for Flame Proof (Glands not supplied)
Excitation Voltage 30 V